Advantage Standard Features: Simplex

Premium Accessories Included- Just Choose your voltage

• Heavy Duty Two-Stage, Splash-Lubricated Air Compressor Pump(s)
• Multi-Finned Cylinders
• Integral Cylinder Head
• Intercoolers for Cooling Between Stages
• Reliable High Flow Disc Valves
• Tapered Roller Main Bearings
• Balanced Crankshaft
• Oil-Level Site Glass
• Centrifungal Unloader for Loadless Starting
• 0-300 PSIG Air Pressure Gauge
• Factory Fill with ChampLub Lubricants
• Mounted Nema 1 Control Panel
• Low Oil Stop Control
• Electric - Auto Tank Drain
• Vibration Isolators
• R-Series, two stage pump
• Loadless Starting
• Intake Filter
• Start/Stop Pressure Switch Control
• 1800 RPM Motor
• ASME Coded Receiver
  • Pressure Relief Valve
  • Service Valve
  • Drain Valve
  • Pressure Gauge
• Enclosed Belt Guard
• Oversized Inlet Filter

Premium Accessories Included:

• Vibration Isolator Pads | Isolates the compressor unit from the foundation or floor. Reduces noise and protects the unit from out-of-level floor situation that could cause vibration and damage
• Air-Cooled Aftercooler | The factory mounted, heavy duty, air-cooled aftercooler effectively removes up to 65% of the moisture from discharged compressed air.
• Control Panel (Duplex units utilize two magnetic starters and alternators) | Provides thermal overload protection, and transformer (simplex only) provides reliable low voltage output to the auxiliary components. May be mounted or unmounted.
• Automatic Tank Drain | A pneumatic or adjustable electric time drain automatically discharges moisture from the receiver
• Low Oil-Level Monitor | Low oil-level monitor shuts down the unit when oil levels are below an adequate level. Prevents the unit from restarting if oil levels are not at an adequate level.

Specifications:

• Tank | Horizontal
• Tank Size (Gallons) | 120
• Phase | 3
• Volts | 208 or 230
• Control Panel, Level 1 | Standard
• Panel Mounting | Standard
• Low Oil Stop Control | Standard
• Electric Tank Drain | Standard
• Vibration Isolators | Standard
• Air Cooled Aftercooler | Standard
• Dual Control | N/A
• California Compliant | Yes
• Pump Model | R30
• Pump RPM | 740
• ACFM @ 175 PSIG | 34.8
• Est Weight (lbs) | 895

TAKE NOTICE OF THIS IMPORTANT INFORMATION:

• CONFIRM CORRECT VOLTAGE & PHASE WHEN ORDERING
• FREE SHIPPING TO A COMMERCIAL ADDRESS ONLY

Compressor Pump Warranty- Each new Champion Assembled Unit has a five (5) year warranty on the compressor pump only, against defects in materials or workmanship under normal use and service, from the date of installation or sixty-six (66) months from the date of shipment by Champion or a Champion distributor, whichever may occur first.

The five-year extended warranty covers parts and labor and is prorated over the five years as follows:

• Year One — 100% coverage
• Year Two — 90% coverage
• Year Three — 80% coverage
• Year Four — 70% coverage
• Year Five — 60% coverage
• Head valves are warranted for Year One only.

Champion makes no warranty on components and/or accessories furnished to Champion by third parties, such as electric motors, gasoline engines and controls. These are warranted only to the extent of the original manufacturer's warranty to Champion. The extended five-year warranty will apply to ASME receivers in they are installed on rubber vibration isolator pads..